How to Hang a Poster Without a Frame

Hanging a Poster with Adhesives

Tape your poster to the wall with magic tape for easy removal later. Magic tape isn’t as sticky as other tapes, and won’t tear your poster when removing it. Even after long periods of use, or in warmer climates, you won’t have to worry about it permanently affixing to your poster. Magic tape is also nearly invisible when used on a smooth surface, making it a very non-invasive technique to hang something. Place the tape at the corners of the poster so they won't curl up. You could also use washi tape. It acts similarly to magic tape, with the added bonus of having fun and colorful patterns on it, allowing for further decorative options. Double-sided tape that won't damage paint is a good option for hanging a poster.

Mount a heavier poster on a wall with poster tack. Rip off a small piece of the tack and mold it between your fingers into a flat little patty. Make a few of these and place them at the points on the poster where you want to stick it to the wall. Firmly press the putty against the wall it to make it stay in place. Mounting tack can rumple and damage paper at the contact points, and is recommended only for thicker material posters, or those mounted to a backing. Don’t place the tack on freshly or poorly painted surfaces, or you could peel the paint off when removing the poster. Warmer climates can sometimes cause the tack to melt and slide off the wall, or permanently stick itself to the wall or poster.

Attach mounting or poster tape to hang a poster without damaging a wall. You can buy mounting or poster tape sold as either a roll which you cut up into tabs, or as pre-cut individual tabs. Place the sticky sides of the tabs face down on the back of the poster in each corner, and remove the film covering before pressing it firmly against the wall to mount it. Use your hands to flatten and smooth out any wrinkly portions of the poster after you’ve put it on the wall. You can remove the poster from the wall without damaging it in any way. The same may not be the case for your poster when you try to remove the tape tabs. Be careful when applying mounting tape, as it’s incredibly easy to tear paper and cardstock posters when using it.

Paste your poster on a blank canvas as an alternative to a frame. If you want to give your poster a nice permanent backing, you can buy a canvas and a spray or gel adhesive such as modge podge at an art supplies store. Coat the back of the poster and the canvas in a layer of it, and carefully place the poster against the canvas. Hold it for 30 seconds, then let it completely dry before hanging. Test a small amount of the adhesive on the poster beforehand to make sure it won’t damage it by bleeding through or causing ink to run. You can get canvases of various thicknesses to suit the poster you’re putting on it.

Attaching a Poster with Clips, Tacks, Magnets, or Velcro

Hang binder clips from nails to easily swap out posters. Hammer in 2 small nails above the poster on each side, and hang a binder clip from both. You can now easily clip or unclip a poster from the binder clips at any time. You can also hang canvases this way without damaging them. Just use bigger binder clips, and larger nails if it’s significantly heavier. Alternatively, clipboards, pant, or skirt hangers can be used instead of binder clips. Clipboards, in particular, serve as a nice backing for flimsier posters.

Use staples, map tacks, or thumb tacks on less precious pieces. For this method, simply punch a tack through the poster and into the wall behind it. Make sure it’s securely stuck into the wall and holding the poster up first before taking your hands away. It works best if you punch through the corners. Tacks will leave a small hole in the poster, and in the wall behind it. Do not use this method if you don’t want to damage your poster. Staples can also be used, just open up the stapler all the way and place its head against the poster before pushing it in to staple it. You could also push sewing needles through the corners of the poster and into the walls—the holes will be nearly invisible when you take the poster down. EXPERT TIP David Julien David Julien DIY Specialist David Julien is a DIY Specialist and the Principal Owner at Nice DIY based in Quebec, Canada. David specializes in creating plans to make unique, affordable, and modern home furnishings. He holds a BA in Graphic Design from the University of Quebec Outaouais. Nice DIY uses sustainable and high-quality materials to create products that are simple to make for everyone. David Julien David Julien DIY Specialist You can also use sewing needles —put one in each of the 4 corners of the poster. This will make tiny holes in your wall that are almost invisible to the eye.

Try using magnets and paperclips to hang a poster anywhere. With masking tape, stick the paperclips to your wall behind where you want to hang your poster. From there, place a small magnet on the front of the poster where the paperclip is to hold it up. You may need to use a few pairs of paperclips and magnets depending on how heavy the poster is. Avoid using strong magnets, so as to not crumple the part of the poster beneath it.

Stick Velcro fasteners on the wall to easily hang or remove posters. Attach the sticky side of the fasteners to the corners of a poster, and to 4 spots on the wall where you want to hang it. Make sure that the poster has either all the loops or hook fasteners, while the wall has the opposite. Line up the fasteners against each other and press them together to have it fix in place. If you have multiple posters of the same size, you can put fasteners on them all and exchange them out as you please.