How to Sew a Comforter

Mango

Editor

posted on 13 years ago — updated on 1 second ago

38
views

A comforter provides warmth and decoration for your bed. You can buy a comforter in a furniture store or department store, but you can also save money by making one. All the supplies needed to sew a comforter are available at fabric and crafts stores. Use these tips to sew a comforter.

Steps

Calculate the Comforter's Dimensions

Measure the length and width of your mattress.

Calculate the drop length. Measure from the point where the mattress touches the box spring to the top of the mattress. Add 3 inches (7.6 cm) to that number. A 12-inch (30.5-cm) deep mattress will have a drop length of 15 inches (31 cm).

Determine the comforter's width. Multiply the drop length by 2. A drop length of 15 inches (31 cm) gives you 30 inches (76. 2 cm). Add the sum to the width of the mattress. A 54-inch (137-cm) wide mattress results in 84 inches (213.4 cm).

Calculate the comforter's length. Multiply the drop length by 2. A drop length of 15 inches (31 cm) gives you 30 inches (76.2 cm). Add the sum to the mattress length. If your mattress is 75 inches (109.5 cm) long, your total is 105 inches (266.7 cm).

Construct the Comforter

Cut the fabric. Place the fabric facing down on a flat surface. Use a tape measure and colored pencil to mark the dimensions of the comforter. Use scissors to cut out the fabric. Repeat the process with the backing.

Cut the batting. Place the cut fabric facing up over the batting on a flat surface. Cut the batting 3 to 4 inches (7.6 to 10.2 cm) wider than the fabric.

Pin the fabric to the batting. Pin along the edges and throughout the comforter with safety pins or straight pins.

Attach the bias tape. Use straight pins to pin the bias tape to the fabric and the batting. Align the outer edge of the tape with the edge of the fabric. The folded side of the bias should face down. Pin the corners flat.

Attach the backing. Place the backing face down on top of the fabric. Align the edges of the backing with the outer edges of the bias tape and fabric. Use straight pins to pin the backing onto the bias tape, fabric and batting.

Sew the comforter together. Use a sewing machine to sew along the edges of the backing, fabric, bias tape and batting on 3 sides. Sew along the edges of the fourth side until you are 12 inches (30.5 cm) from the end. Do not sew the last 12 inches (30.5 cm) of the comforter.

Remove the extra batting. Use scissors to trim the extra batting from the comforter.

Flip the comforter right side out. Pull the inside of the comforter through the 12-inch (30.5-cm) hole. The right sides of the fabric and the batting are now facing outward.

Close the hole. Bend the fabric over the batting. Bend the backing into the comforter. Align the edges of the fabric and backing with the sewn edges on the comforter. The bias tape should be in between the fabric and backing. Use straight pins to hold the materials together. Use a sewing machine to sew the hole together. Sew along the edges.

Press the edges. Iron along the comforter's edges.

Attach the ties. Cut a length of embroidery floss as long as desired. Thread the floss through a quilting needle. Insert the needle through the top of the comforter. Bring the needle back through the top of the comforter. Remove the floss from the needle. Tie the floss in a double knot. Repeat the process as many times as desired throughout the comforter.