Making Traditional Whitewash
Gather the materials. To make traditional whitewash, you’ll need a few materials that can be purchased at your local home improvement store. Hydrated lime, also known as builders or masonry lime. Make sure you don’t get garden lime because this is a different substance. Fine grade salt Water A large bucket A dust mask, protective eyeglasses, and gloves
Mix the whitewash. Combine all of the ingredients in the large bucket to create the whitewash. Make sure to wear protective gear to minimize the risk of being hurt from the lime powder. Wearing a dust mask, protective eyeglasses, and gloves should be sufficient. Mix 2 cups of salt with 1 gallon of warm water and stir to dissolve the salt. Add 6 to 8 cups of hydrated lime to the salt water. Mix well until the lime is dissolved. The mixture should be thinner than traditional paint.
Paint with the whitewash. Use a paintbrush, roller, or paint sprayer to paint the whitewash where desired.
Let the whitewash dry. Allow the whitewash time to dry completely. The wash will turn white as it dries.
Creating a Whitewash Look for Furniture
Collect the necessary materials to begin. You can easily get the materials needed to create a whitewash look for furniture from your local home improvement store. White latex paint Sandpaper, sanding block, or orbital sander Water Water-based polyurethane, if you want a sealant. A cloth A bucket or container Paintbrush
Sand the furniture. Whitewash looks best on raw wood so you need to use sandpaper, a sanding block, or an orbital sander to sand down the furniture. This will remove any finish already on the furniture for the whitewash paint to create the look you’re wanting.
Wipe the furniture with a dry tack cloth. You need to remove all of the sawdust from sanding before painting the whitewash on the furniture to ensure a smooth finish. Use a dry tack cloth to wipe down the furniture and remove any dust on it.
Mix the whitewash. Add one part paint to one part water in a bucket or container, and mix well. This will thin down the latex paint making it look more like traditional whitewash when you paint it on the furniture by letting the natural wood grain show through the paint.
Paint the whitewash on the furniture. Use a paintbrush to paint the whitewash onto the furniture using long brush strokes that follow the wood grain. Apply thin coats for the best results. Work in small sections because whitewash dries quickly. Allow the paint to dry completely, and then add more coats until you reach your desired look.
Create a finish. If desired, after the paint dries. you can paint a water-based polyurethane on the furniture to create a sealant and a finish. This is optional, but may make the whitewash look last longer. Choose between a matte or satin finish.
Comments
0 comment